Jenkins Academy of Applied Technology
Laboratory Chemical Safety — Regulatory crosswalk
Laboratory Chemical Safety · v1.0.0 · October 22, 2026
Course developed by Todd Jerome Jenkins, MS, CSP.
OSHA 1910.1450 laboratory scope, Chemical Hygiene Plan, information and training, hazard identification, exposure and medical duties. Appendix A recommendations are identified as non-mandatory guidance. Actual lab instruction and implementation remain separate.
| Area | Basis | Lessons | Treatment and separate evidence |
|---|---|---|---|
| LAB-001 — Know when the Laboratory Standard applies | 29 CFR 1910.1450(a)-(b), (l) | scope | Identify the employer’s scope decision and the separate requirements for your assigned laboratory work. Identify the employer’s scope decision and the separate requirements for your assigned laboratory work. |
| LAB-001 — Use the Chemical Hygiene Plan | 29 CFR 1910.1450(b), (e) | chp | Locate the current CHP, Chemical Hygiene Officer and prior-approval process before starting assigned work. Locate the current CHP, Chemical Hygiene Officer and prior-approval process before starting assigned work. |
| LAB-001 — Receive the right information at the right time | 29 CFR 1910.1450(f) | training | Identify the new-exposure training trigger and demonstrate where the required lab information is found. Identify the new-exposure training trigger and demonstrate where the required lab information is found. |
| LAB-001 — Read hazard information before exposure | 29 CFR 1910.1450(f)(3)-(4), (h)(1) | hazards | Use the actual label and SDS to explain exposure routes, hazards, controls and missing information. Use the actual label and SDS to explain exposure routes, hazards, controls and missing information. |
| LAB-001 — Plan procedures and obtain required approval | 29 CFR 1910.1450(e)(3)(i)-(ii), (v); Appendix A guidance | planning | Complete a task review and obtain the CHP’s required approval before a new or changed operation. Complete a task review and obtain the CHP’s required approval before a new or changed operation. |
| LAB-001 — Verify hoods and other protective equipment | 29 CFR 1910.1450(e)(3)(iii); Appendix A ventilation guidance | hoods | Identify the hood’s approved use, performance check and failure response before handling chemicals. Identify the hood’s approved use, performance check and failure response before handling chemicals. |
| LAB-001 — Match PPE and hygiene practices to the task | 29 CFR 1910.1450(e)(3)(ii), (f)(4), (i); 1910.132, 1910.133, 1910.134; Appendix A guidance | ppe | Explain the selected PPE’s limits and demonstrate the lab’s safe use and contamination-control practices. Explain the selected PPE’s limits and demonstrate the lab’s safe use and contamination-control practices. |
| LAB-001 — Store and move chemicals safely | 29 CFR 1910.1450(e), (f)(3)(v); Appendix A chemical-management guidance | storage | Check chemical compatibility, container condition, storage equipment and the approved transport method. Check chemical compatibility, container condition, storage equipment and the approved transport method. |
| LAB-001 — Apply added protection for particularly hazardous substances | 29 CFR 1910.1450(b), (e)(3)(viii) | particularly_hazardous | Identify the approved designated area, containment, waste and decontamination controls for the substance. Identify the approved designated area, containment, waste and decontamination controls for the substance. |
| LAB-001 — Manage lab-made substances and contaminated waste | 29 CFR 1910.1450(h)(2), (e)(3)(viii); Appendix A waste guidance | unknowns_waste | Confirm hazard review for new materials and the approved waste route before generating or distributing them. Confirm hazard review for new materials and the approved waste route before generating or distributing them. |
| LAB-001 — Understand exposure limits and monitoring | 29 CFR 1910.1450(c)-(d), (f)(3)-(4) | exposure | Locate the relevant limits, monitoring decision and result-notification process for the assigned chemicals. Locate the relevant limits, monitoring decision and result-notification process for the assigned chemicals. |
| LAB-001 — Know the medical-access and record duties | 29 CFR 1910.1450(g), (j); 1910.1020 | medical_records | Identify the medical-reporting and confidential record-access routes without placing diagnoses in training forms. Identify the medical-reporting and confidential record-access routes without placing diagnoses in training forms. |
| LAB-001 — Respond to spills and exposures within your role | 29 CFR 1910.1450(f)(4), (g); 1910.151(c); applicable emergency procedures | emergencies | Demonstrate the alarm and reporting route, emergency-equipment location and limits of your cleanup role. Demonstrate the alarm and reporting route, emergency-equipment location and limits of your cleanup role. |
| LAB-001 — Verify readiness and review changing work | 29 CFR 1910.1450(e)-(f), (h)-(j); employer CHP procedures | verification | Complete actual lab instruction and employer verification, retaining any task restrictions and follow-up needs. Complete actual lab instruction and employer verification, retaining any task restrictions and follow-up needs. |
Sources
- Laboratory Standard — current mandatory text and clearly marked non-mandatory Appendix A
- OSHA Laboratory Standard
- Employee exposure and medical records — current 1910.1020
- Medical services, first aid and corrosive flushing facilities
- PPE hazard assessment and training
- Eye and face protection
- Respiratory protection — separate program requirements
- Hazard Communication — laboratory and outside-supply provisions
Federal OSHA sources reviewed October 22, 2026. Confirm the actual work, jurisdiction and applicable additional requirements. Agency guidance supports planning; it is distinguished from mandatory standard text.