Choose your work activity
Every walkthrough includes a defined scenario, explained controls, a browser draft builder, and four free downloads: a worked example and blank template in Word and PDF. No account required.
Showing 1–12 of 222 examples
Concrete Saw Cutting JHA: Worked Example & Free Template
Build a concrete saw cutting JHA with a defined worksite, step-by-step hazard and control decisions, a completed example, and free editable templates.
Examples and templates are free without an account.
Formwork AHA: Gang Wall Forms, Risk Matrix & Free Template
Work through a gang wall formwork AHA with site conditions, planned controls, a USACE risk matrix, EM 385-1-1 guidance, and free Word/PDF templates.
Examples and templates are free without an account.
Concrete Pouring JHA: Pumped Slab Placement Example
Build a concrete pouring JHA or JSA for a pumped slab: delivery traffic, pump setup, wet-cement exposure, placement, and cleanup, with a free example and template.
Examples and templates are free without an account.
Excavation and Trenching JSA Example: Plan the Dig and Protect Entry
Build an excavation and trenching JSA from a fictional utility trench, with explained task, hazard, control and verification decisions plus a free editable template.
Examples and templates are free without an account.
Drywall Hanging JHA: Sheet Handling and Installation
Walk through a drywall hanging JHA or JSA for staging sheets, moving panels, cutting, lifting, fastening, and cleanup. Includes a free worked example and editable template.
Examples and templates are free without an account.
Rebar Installation JHA: Handling, Placing, and Tying Steel
A rebar installation JHA and JSA walkthrough covering delivery, bundle handling, cutting, placing, tying, and impalement protection, with a free example and template.
Examples and templates are free without an account.
Welding and Cutting JSA: Hot Work Example and Free Template
Build a welding and cutting JSA around material identification, fire prevention, fumes, electrical equipment, gas systems, and a documented closeout.
Examples and templates are free without an account.
Forklift Operation JHA: Pallet Handling Example and Free Template
Work through a forklift operation JHA for a conventional mast truck: capacity, load stability, pedestrian separation, travel, placement, and parking.
Examples and templates are free without an account.
Scaffold Erection and Dismantling JHA: Worked Example and Free Template
Plan a supported frame scaffold from ground preparation through erection, inspection, handover, and controlled dismantling, with clear competent and qualified roles.
Examples and templates are free without an account.
Stripping Forms JHA: Controlled Release and Removal
Develop a stripping forms JHA or JSA for release checks, temporary support, panel removal, lifting interfaces, and stacking, with a free example and editable template.
Examples and templates are free without an account.
Confined Space Entry JSA Example for Construction Work
Work through a construction confined-space entry JSA, including isolation, atmospheric evaluation, attendant duties and rescue readiness, with a free planning template.
Examples and templates are free without an account.
Demolition JHA Example: Selective Interior Partition Removal
Create a demolition JHA for a bounded interior removal job, from engineering survey and utility control through dust management, debris handling and change checks.
Examples and templates are free without an account.
Use the format your job requires
A job hazard analysis (JHA) and job safety analysis (JSA) commonly organize work into steps, hazards, and controls. An activity hazard analysis (AHA) may also need a specified risk method, personnel qualifications, equipment, inspections, and acceptance process. The project’s requirements decide what the finished document must contain.
The formwork AHA walkthrough covers the additional planning fields, a referenced USACE risk matrix, and the distinction between contractor risk acceptance and contractual review under EM 385-1-1.
What good looks like
A useful analysis describes observable work, explains how harm could occur, assigns specific controls and identifies who verifies them. Each example compares weak instructions with stronger controls and asks what should change when the worksite changes.
Learn the method in the free course
Practice Task | Hazard | Control, build a short JHA/JSA and prepare a crew brief. The basic Academy track includes feedback, worksheets and account progress with a free Safety account.
Work through each example with the people doing the job. Replace its assumptions, resolve open actions, and obtain your site’s required authorization before work begins.