JHA / JSA / AHA builderFormwork AHA
A JHA breaks the work into steps, hazards and controls. Use this example to build a draft for your actual job and review it with your crew.
Just need the example? Download it here.For the crew
You know the work. Let’s turn that experience into a plan your crew can talk through. Start with today’s job, then check the steps together.
Let’s build your JHA.
Step 1 of 4 · Working draft
Your job
Tell Jenkins what you’re planning and where the work will happen. Use the actual job details.
Use the published example’s suggestions when they fit your task, or write your own steps. These are planned controls, not verified worksite conditions.
Describe an observable step, how someone could be harmed, and the control that acts on that hazard. Identify who checks it and what evidence is needed.
Walk through the plan with the people doing the work. Resolve missing controls and agree who checks them. Moving to the next step does not approve the work.
Confirm people, equipment and emergency arrangements
Record changes, checks, and open actions
Walk the work area, review with the crew, and resolve missing controls. Follow the required approval process. This tool does not judge completeness, verify signatures or authorize work.
Print your own JHA by signing in, or contribute the selected structured categories as a guest. Signing in does not require research participation. Written job details are processed to prepare your export and are stored on our server only if you save to your private company library.
Research purpose, data fields, retention and withdrawal · Privacy notice
Sign-in uses a free account. Your tab draft is retained for the return from sign-in.
Hosted organization saving requires active jSMS access and a company workspace. View jSMS plans.
The export uses landscape pages, task-only continuation pages and a Page X of Y footer in current Chrome or Edge. Review every page. Opening an export is not proof that the JHA was printed or used. The PDF includes its research choice and reference; the private withdrawal link stays in the export’s screen-only receipt.
Device storage and other draft options
Device copies may contain private job information. Clear them when using a shared device.
Your entries stay in this working draft as you move between steps. Required field checks, employer review and work authorization remain separate.
Your Formwork AHA
Walk through the job in order. Use these possible hazards, planned controls and checks to start a conversation about your actual work.
011. Release the design, work area and lift sequence
Possible hazards: Wrong panel weights, unsupported slab loads, incompatible components or an unplanned overhead-line exposure can cause a collapse, overturn or electrocution.
Planned controls: The foreperson obtains the current form drawings and lift arrangements, confirms equipment capacity and setup with the responsible lifting personnel, and separates the work area. Resolve electrical-line and ground-bearing conditions before locating the crane. Do not substitute an AHA for the form design or lift plan.
Check before work: Before setup, the foreperson and responsible specialists verify drawing revisions, supplier instructions, weights, support conditions and the closed work boundary. Record unresolved items as hold points.
022. Install released base plates and brace anchors
Possible hazards: Drilling can strike embedded services or reinforcement, release respirable silica, and expose the operator to bit binding, noise and flying fragments.
Planned controls: Release anchor locations, type, depth, installation method and concrete strength with the responsible designer. For handheld or stand-mounted concrete drills, use the applicable OSHA Table 1 shroud/cowling and dust-collection arrangement, including hole cleaning, or the documented alternative exposure assessment. Follow tool, anchor and vacuum instructions; protect eyes and address noise and electrical supply.
Check before work: The installer and silica competent person check the drilling release, specified extraction system, filters and hole-cleaning method before work; verify anchor installation against the design.
033. Assemble and inspect panels on stable supports
Possible hazards: A panel can roll or slip during assembly; hands can be crushed by joints and workers can be cut by damaged components.
Planned controls: Use stable supports and handling equipment suited to the panel. Assemble connections, braces, lifting points and compatible access components in the supplier sequence. Keep hands out of closing joints; remove damaged components from service and use handling tools rather than fingers for alignment.
Check before work: The formwork lead checks component condition, fasteners, lifting hardware and assembly against the current system instructions before release for lifting.
044. Hoist and land each gang within the controlled area
Possible hazards: A suspended panel can swing in wind, drop from unsuitable rigging, or crush a worker against a fixed object.
Planned controls: Qualified personnel select and inspect rigging and approved lifting points. The operator follows the lift plan, equipment limits and agreed signals. Keep unnecessary personnel outside the fall zone; receiving workers stay clear of pinch points. Use a tag or restraint line when needed to prevent hazardous rotation, with a safe position and no entanglement exposure. Stop when wind, visibility or communication defeats control.
Check before work: Before every pick, the lifting team verifies the load and path, attachments, signals, exclusion area and weather against the actual equipment and form limits.
055. Brace the panel before releasing the crane
Possible hazards: An unbraced or incorrectly anchored wall form can overturn as soon as the lifting support is removed.
Planned controls: Install the designed braces and anchor connections in the specified sequence while maintaining the planned lifting support. Keep personnel out of the collapse zone. Release rigging only after the formwork lead confirms that the required temporary stability system is complete; never use workers to hold a panel upright.
Check before work: The formwork lead verifies all specified braces, connections and anchors before giving the agreed release instruction. Record the inspection and any design change.
066. Close the wall and complete protected access
Possible hazards: Installing ties, closing opposing forms or accessing an incomplete platform can cause a fall, pinch injury or dropped-object strike.
Planned controls: Use the designed access and platform system; where it is incomplete, use the separately assessed access equipment and fall-protection/rescue arrangements. Install ties and connections from protected positions in the supplier sequence. Close guardrail and access openings and control the area below before releasing the platform.
Check before work: The foreperson and applicable competent person inspect platform support, guardrails, access, tie installation and any personal fall-protection system before use. Verify access-equipment training and rescue readiness.
077. Inspect and hand off before concrete placement
Possible hazards: Missing ties, movement, overloading or an uncontrolled placement rate can cause a blowout or collapse during the next operation.
Planned controls: Hold the pour until the required inspection and release confirm drawings, ties, braces, anchors, platforms and access. Communicate the design placement limits, monitoring responsibilities and stop triggers to the placement crew. Maintain bracing and access protection; recheck after disturbance or adverse weather.
Check before work: The responsible formwork reviewer documents the handoff and open actions. The placement supervisor accepts the relevant limits into the separate concrete-pouring analysis before dispatching the pour.
Example scope and starting conditions
Fictional teaching scenario: a formwork crew assembles and sets modular gang wall forms for an eight-foot-high concrete wall on a ground-level slab in a closed construction area. A mobile crane places preassembled panels; a separate mobile elevating work platform provides access where the designed form platform is not yet usable. This example ends at the documented handoff for a pour. Concrete placement, stripping, climbing forms, slab falsework, excavation, and work over water require their own analysis.
- The form system, panel weights, lifting points, brace forces, anchor capacity and installation sequence must come from the actual supplier instructions and project design. No generic brace spacing or wind speed is assumed.
- The slab, anchor locations and underground/embedded services need release before drilling or supporting equipment. Concrete strength and slab capacity must suit the designed anchors and imposed loads.
- The lift area is separated from pedestrians and other trades. Ground bearing, crane setup, overhead lines, delivery access and an emergency route are checked before mobilization.
- Ground assembly is preferred for compatible platform, guardrail and access components. The assembly sequence must protect workers during transitions, before the completed platform exists.
- The foreperson, SSHO, formwork designer/supplier, qualified lifting personnel and designated competent/qualified persons coordinate the AHA. Actual names, qualifications and acceptance are job-specific.
Know when to pause
- Stop for missing or damaged braces, unexpected anchor behavior, panel movement or a drawing/supplier mismatch.
- Pause for changes in panel size, weight, rigging, access method, crane location or ground support.
- Stop when wind, visibility, nearby operations, overhead-line conditions or communication invalidate the planned controls.
- Revise the AHA for changed conditions or required personnel; communicate the revision to every involved worker and obtain required acceptance before restarting.
After a pause, correct the condition, reassess the work, and obtain required authorization before restarting.
Free example and template
No account required. The worked example contains planned controls. The blank template is for your own work; neither includes fabricated inspection results, signatures or approval.
Worked exampleNeed help? Ask Jenkins
Jenkins · Your Safety Concierge
What brings you here today? Choose what you’re working on, or tell Jenkins about your situation.
Jenkins matches your words to published starting points. Keep names and private job details in your working draft. Suitable free resources come first.
For managers
Does the team have what it needs to carry out the plan? Give the crew time, equipment and support, and make it clear who will resolve anything that is missing.
Manager checks and supporting resources
Confirm the people doing the work have the time, equipment, information and support to carry out the plan. Agree who checks the controls and who resolves open actions.
Decisions that change the plan
What makes this an AHA rather than a renamed three-column JHA?
For contractor work under EM 385-1-1 (15 March 2024), paragraph 2-6 calls for project/contract identification, preparer and acceptance authority, detailed steps and hazards, controls, residual step RACs and an overall RAC, equipment, training and inspections, designated competent/qualified persons, and employee review. Additional activity chapters and the contract can add requirements. ENG Form 6206 is a non-mandatory outline; equivalent JHA/JSA formats still need the required information.
Who accepts contractor risk?
The prime contractor establishes its internal acceptance authority by residual risk level in the Accident Prevention Plan. Required contractor acceptance and signature precede work, and accepted AHAs go to the KO or COR for contractual review and acceptance. USACE does not accept contractor risk. Do not copy the USACE employee command-acceptance table into a contractor approval process.
How should the teaching risk ratings be used?
The example ratings illustrate matrix lookup, not evidence of site risk. Several steps retain H because a fatal collapse, suspended-load event or fall remains credible. Do not average ratings or reduce severity just because PPE is present. The actual team must assess every hazard, justify likelihood after controls, strengthen controls where needed and obtain the required risk acceptance.
Keep planning connected
Resources that support this JHA
Additional tools for task planning and safe work. Start with the free resources; explore paid options only when they meet an additional need.
Toolbox talks for the work
Prepare a practical crew discussion.
Concrete Formwork: Verify Stability Before Placement →
Safety program resources
Review procedures, roles, and requirements.
Browse the existing catalog and confirm the scope and purchase availability of each program.
Browse safety programs →
Paid service · Availability
Task-specific training and qualifications
Explore applicable training and qualification needs.
Task-specific training services are not currently available to book here. Start with the free training-needs lookup; a toolbox talk or online course alone does not establish competence or employer authorization.
Review training needs · Free →People, equipment, emergency arrangements and open actions are recorded in the guided JHA’s Crew review step.
Open the crew review step →For safety professionals
How do we know the planning process and controls are working? Connect what the crew reports with field checks, risk decisions and the evidence behind your system.
Industry context, SIF, control verification and AHA review
AHA identification and acceptance
Record the actual project information. The example supplies no names, signatures or work authorization.
Review the referenced risk matrix and instructions. Ratings are entered by the reviewer; this tool does not calculate or validate risk.
AHA supporting information
Guidance and evidence
Review the method, risk decisions and evidence behind the plan. Use the actual jurisdiction, equipment instructions, employer process and project requirements.
Task-by-task control and verification rationale
1. Release the design, work area and lift sequence
Hazard: Wrong panel weights, unsupported slab loads, incompatible components or an unplanned overhead-line exposure can cause a collapse, overturn or electrocution.
Control: The foreperson obtains the current form drawings and lift arrangements, confirms equipment capacity and setup with the responsible lifting personnel, and separates the work area. Resolve electrical-line and ground-bearing conditions before locating the crane. Do not substitute an AHA for the form design or lift plan.
Verification: Before setup, the foreperson and responsible specialists verify drawing revisions, supplier instructions, weights, support conditions and the closed work boundary. Record unresolved items as hold points.
Why this belongs in the analysis: The first control is a workable design and released area; instructions to be careful cannot correct an unstable system.
Residual RAC example: Teaching estimate: Catastrophic × Seldom = H. Validate the exposure and likelihood with the actual design and worksite.
2. Install released base plates and brace anchors
Hazard: Drilling can strike embedded services or reinforcement, release respirable silica, and expose the operator to bit binding, noise and flying fragments.
Control: Release anchor locations, type, depth, installation method and concrete strength with the responsible designer. For handheld or stand-mounted concrete drills, use the applicable OSHA Table 1 shroud/cowling and dust-collection arrangement, including hole cleaning, or the documented alternative exposure assessment. Follow tool, anchor and vacuum instructions; protect eyes and address noise and electrical supply.
Verification: The installer and silica competent person check the drilling release, specified extraction system, filters and hole-cleaning method before work; verify anchor installation against the design.
Why this belongs in the analysis: A base plate is only as reliable as the substrate and anchor installation beneath it.
Residual RAC example: Teaching estimate: Critical × Seldom = M after service release and specified exposure controls; reassess each identified hazard.
3. Assemble and inspect panels on stable supports
Hazard: A panel can roll or slip during assembly; hands can be crushed by joints and workers can be cut by damaged components.
Control: Use stable supports and handling equipment suited to the panel. Assemble connections, braces, lifting points and compatible access components in the supplier sequence. Keep hands out of closing joints; remove damaged components from service and use handling tools rather than fingers for alignment.
Verification: The formwork lead checks component condition, fasteners, lifting hardware and assembly against the current system instructions before release for lifting.
Why this belongs in the analysis: Ground assembly reduces later exposure at height only when the ground setup is stable and the assembly remains liftable.
Residual RAC example: Teaching estimate: Critical × Seldom = M with stable supports and verified handling method.
4. Hoist and land each gang within the controlled area
Hazard: A suspended panel can swing in wind, drop from unsuitable rigging, or crush a worker against a fixed object.
Control: Qualified personnel select and inspect rigging and approved lifting points. The operator follows the lift plan, equipment limits and agreed signals. Keep unnecessary personnel outside the fall zone; receiving workers stay clear of pinch points. Use a tag or restraint line when needed to prevent hazardous rotation, with a safe position and no entanglement exposure. Stop when wind, visibility or communication defeats control.
Verification: Before every pick, the lifting team verifies the load and path, attachments, signals, exclusion area and weather against the actual equipment and form limits.
Why this belongs in the analysis: A form panel presents a large wind area; a universal wind number or mandatory tag line for every situation can conceal the actual problem.
Residual RAC example: Teaching estimate: Catastrophic × Seldom = H. The lifting team must justify the actual probability and controls.
5. Brace the panel before releasing the crane
Hazard: An unbraced or incorrectly anchored wall form can overturn as soon as the lifting support is removed.
Control: Install the designed braces and anchor connections in the specified sequence while maintaining the planned lifting support. Keep personnel out of the collapse zone. Release rigging only after the formwork lead confirms that the required temporary stability system is complete; never use workers to hold a panel upright.
Verification: The formwork lead verifies all specified braces, connections and anchors before giving the agreed release instruction. Record the inspection and any design change.
Why this belongs in the analysis: The transfer from crane support to temporary bracing is a distinct hold point, not an assumed part of landing.
Residual RAC example: Teaching estimate: Catastrophic × Seldom = H. Do not lower consequence merely because a brace has been installed.
6. Close the wall and complete protected access
Hazard: Installing ties, closing opposing forms or accessing an incomplete platform can cause a fall, pinch injury or dropped-object strike.
Control: Use the designed access and platform system; where it is incomplete, use the separately assessed access equipment and fall-protection/rescue arrangements. Install ties and connections from protected positions in the supplier sequence. Close guardrail and access openings and control the area below before releasing the platform.
Verification: The foreperson and applicable competent person inspect platform support, guardrails, access, tie installation and any personal fall-protection system before use. Verify access-equipment training and rescue readiness.
Why this belongs in the analysis: The completed platform cannot protect a worker during its own unprotected installation.
Residual RAC example: Teaching estimate: Catastrophic × Seldom = H where a fatal fall remains credible; reassess for the actual access method.
7. Inspect and hand off before concrete placement
Hazard: Missing ties, movement, overloading or an uncontrolled placement rate can cause a blowout or collapse during the next operation.
Control: Hold the pour until the required inspection and release confirm drawings, ties, braces, anchors, platforms and access. Communicate the design placement limits, monitoring responsibilities and stop triggers to the placement crew. Maintain bracing and access protection; recheck after disturbance or adverse weather.
Verification: The responsible formwork reviewer documents the handoff and open actions. The placement supervisor accepts the relevant limits into the separate concrete-pouring analysis before dispatching the pour.
Why this belongs in the analysis: A handoff connects two analyses so that limits do not disappear when the crew changes.
Residual RAC example: Teaching estimate: Catastrophic × Seldom = H for collapse exposure. Actual overall risk remains subject to the project review.
Compare control wording
| Needs improvement | More useful for this scenario |
|---|---|
| Forms — use PPE. | Verify the designed brace and anchor system before releasing the crane; name the person who gives the release instruction. |
| All residual risks are low. | Assess remaining consequence and likelihood for each step. Keep the highest step rating as the overall RAC and route it through the correct acceptance process. |
| Use the completed platform for access. | Explain how workers are protected while the platform and guardrails are still being assembled. |
AHA risk matrix and supporting fields
This matrix is reproduced from the USACE RMS Contractor Mode manual v5.1, printed page 145. Use the method and definitions required by your project. Assess remaining severity and probability after controls; the overall RAC must be at least the highest step RAC. This is a severity–probability lookup, not a numerical average.
| Severity / probability | Frequent | Likely | Occasional | Seldom | Unlikely |
|---|---|---|---|---|---|
| Catastrophic | E | E | H | H | M |
| Critical | E | H | H | M | L |
| Marginal | H | M | M | L | L |
| Negligible | M | L | L | L | L |
E = Extremely high; H = High; M = Medium (called “Moderate” in the RMS matrix legend); L = Low. These category labels do not establish acceptability or authorize work.
Worked-example overall RAC: H — instructional estimate only; actual site rating and acceptance are not supplied.
Equipment: Project-specific form panels, ties, braces, anchors and lifting hardware; crane and rigging per lift plan; released drill and dust-collection system; designed access/platform components or separately assessed access equipment.
Training: Form-system assembly and stability sequence; crane/operator, rigger and signal-person qualifications as applicable; silica controls; access equipment and fall protection/rescue. List actual names, written CP/QP designations and evidence.
Inspection: Design and slab/anchor release before assembly; tool and dust-system checks; lifting/rigging checks; brace hold point before unhooking; platform/access inspection before use; documented pre-pour handoff and reinspection after disturbance.
PPE: Select head, eye, foot, hand, hearing and any respiratory/fall protection for the actual exposures and equipment. Follow the applicable programs, fit requirements and rescue arrangements; PPE does not replace stability or exclusion controls.
The worksheet also provides project/contract identification, preparer and acceptance authority, CP/QP designations, employee review records, and revision fields. Names, signatures, dates, field evidence and acceptance remain for the actual project.
Common questions
Can I use this for slab forms, climbing forms or form stripping?
Use a separate assessment for those activities. This scenario covers setting modular gang wall forms at ground level through the pre-pour handoff. Different support systems and dismantling sequences change the hazards.
Is the free worksheet official ENG Form 6206?
No. It is an original editable learning worksheet with AHA planning fields, a referenced matrix and a review record. Get the current official form from the USACE Engineer Forms index and follow your contract requirements. No signature or approval has been supplied.
Can I call this a formwork JHA or JSA?
Yes, if that is your organization’s terminology, but the required information and acceptance process still govern. A different title does not change the hazards or satisfy missing AHA requirements.
Are these resources part of a paid course?
This walkthrough, browser draft builder and downloads are free public resources, separate from Academy course enrollment.
References and source note
- USACE EM 385-1-1, effective 15 March 2024 — especially contractor AHA paragraph 2-6 and applicable activity chapters
- USACE Engineer Forms — ENG 6206, Activity Hazard Analysis (September 2024)
- USACE RMS Contractor Mode manual v5.1 — AHA matrix and ENG 6206 workflow, printed pages 145–150
- OSHA 1926.703 — Cast-in-place concrete and formwork
- OSHA 1926.1425 — Keeping clear of the load
- OSHA 1926.1153 — Respirable crystalline silica
This original walkthrough was informed by review of uploaded examples, then rewritten for the stated fictional scenario using current primary references. It does not reproduce a source document or its approval record. Use actual equipment instructions and site requirements alongside these references. Reference review: October 6, 2026.
Developed by Todd Jerome Jenkins, MS, CSP · Edition v1.0 · October 6, 2026
Use the builder’s Print / Save as PDF action after signing in or accepting research participation.