JHA / JSA / AHA builderMasonry Mortar Mixer Operation JHA
A JHA breaks the work into steps, hazards and controls. Use this example to build a draft for your actual job and review it with your crew.
Just need the example? Download it here.For the crew
You know the work. Let’s turn that experience into a plan your crew can talk through. Start with today’s job, then check the steps together.
Let’s build your JHA.
Step 1 of 4 · Working draft
Your job
Tell Jenkins what you’re planning and where the work will happen. Use the actual job details.
Use the published example’s suggestions when they fit your task, or write your own steps. These are planned controls, not verified worksite conditions.
Describe an observable step, how someone could be harmed, and the control that acts on that hazard. Identify who checks it and what evidence is needed.
Walk through the plan with the people doing the work. Resolve missing controls and agree who checks them. Moving to the next step does not approve the work.
Confirm people, equipment and emergency arrangements
Record changes, checks, and open actions
Walk the work area, review with the crew, and resolve missing controls. Follow the required approval process. This tool does not judge completeness, verify signatures or authorize work.
Print your own JHA by signing in, or contribute the selected structured categories as a guest. Signing in does not require research participation. Written job details are processed to prepare your export and are stored on our server only if you save to your private company library.
Research purpose, data fields, retention and withdrawal · Privacy notice
Sign-in uses a free account. Your tab draft is retained for the return from sign-in.
Hosted organization saving requires active jSMS access and a company workspace. View jSMS plans.
The export uses landscape pages, task-only continuation pages and a Page X of Y footer in current Chrome or Edge. Review every page. Opening an export is not proof that the JHA was printed or used. The PDF includes its research choice and reference; the private withdrawal link stays in the export’s screen-only receipt.
Device storage and other draft options
Device copies may contain private job information. Clear them when using a shared device.
Your entries stay in this working draft as you move between steps. Required field checks, employer review and work authorization remain separate.
Your Masonry Mortar Mixer Operation JHA
Walk through the job in order. Use these possible hazards, planned controls and checks to start a conversation about your actual work.
011. Release the batch station
Possible hazards: The mixer or receiving container can move; cords and traffic can create shock or contact hazards.
Planned controls: Place the mixer on the model-specified stable surface and secure it against movement. Separate traffic, protect supply cords and provide the applicable construction electrical protection. Establish water, material and container routes without crossing the discharge pinch zone.
Check before work: Station lead checks setup, supply protection and access before connecting power.
022. Inspect guards and controls
Possible hazards: An exposed drive or failed control can draw a hand into moving parts.
Planned controls: Assigned operator inspects the drum guard, drive enclosure, latches and operating controls under the manual. Complete permitted function checks with the area clear and guards in place; remove defective equipment from service rather than bypassing a guard or switch.
Check before work: Operator records defects and demonstrates the normal stop before loading.
033. Charge through the guarded arrangement
Possible hazards: Bag dust can expose the crew to silica; sharp packaging and moving paddles can injure hands.
Planned controls: Use the actual guarded loading procedure and the employer’s exposure-control method for the identified dry mix. Stage manageable bags or use a loading aid, keep faces away from the release and hands and tools out of the drum. Use assessed contact, eye and respiratory protection where required.
Check before work: Lead verifies material identification, charging controls and the operator’s loading position.
044. Mix and respond to abnormal operation
Possible hazards: A blocked or overloaded mixer can move unexpectedly and invite unsafe reach-in.
Planned controls: Operate within the model’s permitted batch and mixing procedure with guards secured. Keep the operating area clear; stop for unusual movement, noise or poor discharge. Use the specified shutdown and isolation procedure before any obstruction is investigated.
Check before work: Operator monitors mixer response and holds the next charge for any defect.
055. Discharge into a stable container
Possible hazards: The tipping drum, receiving cart or wet mortar can crush hands or burn skin.
Planned controls: Position the receiving container before operating the model’s discharge controls. Keep helpers outside drum and handle movement, control the pour and prevent overload of the receiving container. Maintain wet-cement protection and prompt washing access.
Check before work: Operator confirms receiving stability and clear pinch zones before discharge.
066. Isolate and clean the mixer
Possible hazards: Stopped paddles can restart and dried residue can expose cleanup workers.
Planned controls: Shut down, disconnect and control the power source under the employer’s isolation procedure; verify stopped motion and prevent restart before guarded access for cleanup. Stabilize any movable drum as required by the manual. Use the permitted wet or HEPA cleanup method, protect electrical components and restore guards before handover.
Check before work: Operator verifies the isolated state and records remaining equipment defects.
Example scope and starting conditions
A trained masonry worker will operate a guarded electric paddle-type mortar mixer at a separated outdoor ground-level batch station. Bagged dry material and water are charged using the mixer’s designated guarded loading arrangement, and mortar is discharged into stable receiving containers. This fictional learning example describes planned controls; it records no actual inspection or work authorization.
- The actual model instructions govern setup, loading, discharge, shutdown and isolation; a mortar mixer is not assumed to match a concrete drum mixer.
- The exposure plan addresses dry-bag handling, charging and residue cleanup as well as wet-cement contact.
- This excludes towing, fuel-powered equipment, repairs, unguarded operation and entry into the drum while connected to power.
Know when to pause
- A guard or stop control fails, or the mixer moves abnormally.
- Charging dust controls, electrical protection or safe receiving access cannot be maintained.
- Cleanup needs guarded access before power and movement are safely isolated.
After a pause, correct the condition, reassess the work, and obtain required authorization before restarting.
Free example and template
No account required. The worked example contains planned controls. The blank template is for your own work; neither includes fabricated inspection results, signatures or approval.
Worked exampleNeed help? Ask Jenkins
Jenkins · Your Safety Concierge
What brings you here today? Choose what you’re working on, or tell Jenkins about your situation.
Jenkins matches your words to published starting points. Keep names and private job details in your working draft. Suitable free resources come first.
For managers
Does the team have what it needs to carry out the plan? Give the crew time, equipment and support, and make it clear who will resolve anything that is missing.
Manager checks and supporting resources
Confirm the people doing the work have the time, equipment, information and support to carry out the plan. Agree who checks the controls and who resolves open actions.
Questions to resolve before work
- Which guards, loading method and discharge controls are required by this mixer model?
- What dust-control evidence supports the dry-material charging method?
- How will the operator prevent restart and verify the safe state before drum cleanup?
Training and qualifications to confirm
- Demonstrated use of the actual mortar mixer’s guards, loading, discharge, stop and isolation arrangements.
- Material-specific silica and hazard-communication instruction, wet-cement protection and the selected cleanup method.
Confirm the actual training evidence for the assigned people. A toolbox talk does not establish competence.
Decisions that change the plan
Does the CMU wall example already cover this mixer operation?
It includes mortar supply as one part of wall construction. This separate analysis follows the mixer’s guarded charging, operating, discharge and isolation cycle; the actual machine manual still establishes its detailed procedure.
What must the crew record for actual use?
Identify the actual equipment and work boundaries, responsible people, applicable criteria, inspection findings and open actions. Resolve changes with affected crews and obtain required project authorization before work.
Keep planning connected
Resources that support this JHA
Additional tools for task planning and safe work. Start with the free resources; explore paid options only when they meet an additional need.
Toolbox talks for the work
Prepare a practical crew discussion.
Powered Tools: Check the Tool, Guard and Accessory →Silica: Verify Dust Controls Before Cutting →Energy Isolation: Verify Before Servicing →Mortar Mixers: Check the Guarded Work Cycle →
Safety program resources
Review procedures, roles, and requirements.
Browse the existing catalog and confirm the scope and purchase availability of each program.
Browse safety programs →
Paid service · Availability
Task-specific training and qualifications
Explore applicable training and qualification needs.
Task-specific training services are not currently available to book here. Start with the free training-needs lookup; a toolbox talk or online course alone does not establish competence or employer authorization.
Review training needs · Free →People, equipment, emergency arrangements and open actions are recorded in the guided JHA’s Crew review step.
Open the crew review step →For safety professionals
How do we know the planning process and controls are working? Connect what the crew reports with field checks, risk decisions and the evidence behind your system.
Industry context, SIF, control verification and AHA review
Guidance and evidence
Review the method, risk decisions and evidence behind the plan. Use the actual jurisdiction, equipment instructions, employer process and project requirements.
Task-by-task control and verification rationale
1. Release the batch station
Hazard: The mixer or receiving container can move; cords and traffic can create shock or contact hazards.
Control: Place the mixer on the model-specified stable surface and secure it against movement. Separate traffic, protect supply cords and provide the applicable construction electrical protection. Establish water, material and container routes without crossing the discharge pinch zone.
Verification: Station lead checks setup, supply protection and access before connecting power.
Why this belongs in the analysis: A workable batch route reduces exposure during every repeated cycle.
2. Inspect guards and controls
Hazard: An exposed drive or failed control can draw a hand into moving parts.
Control: Assigned operator inspects the drum guard, drive enclosure, latches and operating controls under the manual. Complete permitted function checks with the area clear and guards in place; remove defective equipment from service rather than bypassing a guard or switch.
Verification: Operator records defects and demonstrates the normal stop before loading.
Why this belongs in the analysis: A rotating mixer is not ready simply because its motor starts.
3. Charge through the guarded arrangement
Hazard: Bag dust can expose the crew to silica; sharp packaging and moving paddles can injure hands.
Control: Use the actual guarded loading procedure and the employer’s exposure-control method for the identified dry mix. Stage manageable bags or use a loading aid, keep faces away from the release and hands and tools out of the drum. Use assessed contact, eye and respiratory protection where required.
Verification: Lead verifies material identification, charging controls and the operator’s loading position.
Why this belongs in the analysis: Dry-bag charging needs assessment; a wet final mix does not settle that exposure.
4. Mix and respond to abnormal operation
Hazard: A blocked or overloaded mixer can move unexpectedly and invite unsafe reach-in.
Control: Operate within the model’s permitted batch and mixing procedure with guards secured. Keep the operating area clear; stop for unusual movement, noise or poor discharge. Use the specified shutdown and isolation procedure before any obstruction is investigated.
Verification: Operator monitors mixer response and holds the next charge for any defect.
Why this belongs in the analysis: Never turn an operating problem into a hand-tool intervention in moving paddles.
5. Discharge into a stable container
Hazard: The tipping drum, receiving cart or wet mortar can crush hands or burn skin.
Control: Position the receiving container before operating the model’s discharge controls. Keep helpers outside drum and handle movement, control the pour and prevent overload of the receiving container. Maintain wet-cement protection and prompt washing access.
Verification: Operator confirms receiving stability and clear pinch zones before discharge.
Why this belongs in the analysis: Discharge combines machine movement with a heavy, caustic material.
6. Isolate and clean the mixer
Hazard: Stopped paddles can restart and dried residue can expose cleanup workers.
Control: Shut down, disconnect and control the power source under the employer’s isolation procedure; verify stopped motion and prevent restart before guarded access for cleanup. Stabilize any movable drum as required by the manual. Use the permitted wet or HEPA cleanup method, protect electrical components and restore guards before handover.
Verification: Operator verifies the isolated state and records remaining equipment defects.
Why this belongs in the analysis: The stop switch is an operating control, not the complete cleanup isolation.
Compare control wording
| Needs improvement | More useful for this scenario |
|---|---|
| Work carefully and wear PPE. | Use the actual guarded loading procedure and the employer’s exposure-control method for the identified dry mix. Stage manageable bags or use a loading aid, keep faces away from the release and hands and tools out of the drum. Use assessed contact, eye and respiratory protection where required. |
| Check that everything is ready. | Place the mixer on the model-specified stable surface and secure it against movement. Separate traffic, protect supply cords and provide the applicable construction electrical protection. Establish water, material and container routes without crossing the discharge pinch zone. |
Common questions
Can this example be used as a JSA?
Adapt its Task | Hazard | Control analysis to the employer’s format and actual conditions. The example is a teaching aid, not evidence that controls were checked.
What changes if the project requires an AHA?
Use the governing AHA format, risk method, supporting records and acceptance process. The published formwork AHA demonstrates that additional structure; changing a JHA title does not supply it.
Are these resources part of a paid course?
This walkthrough, browser draft builder and downloads are free public resources, separate from Academy course enrollment.
References and source note
- Multiquip Plaster and mortar operation manuals
- OSHA 1926.300 Hand and power tools
- OSHA 1926.1153 Respirable crystalline silica
Original instructional scenario with planned controls. Primary references support hazard planning. Use actual equipment and product instructions, project design and employer requirements to establish field criteria. Use actual equipment instructions and site requirements alongside these references. Reference review: October 9, 2026.
Developed by Todd Jerome Jenkins, MS, CSP · Edition v1.0 · October 9, 2026
Use the builder’s Print / Save as PDF action after signing in or accepting research participation.